Site icon Abrasion resistant pipe

Cast basalt

slider cast basalt lined steel pipe

Cast basalt is a kind of silicate crystalline material after producing and processing, it made of natural rock (basalt, diabase and other basite) or some industrial waste as the main raw materials, by melting, casting, crystallization, annealing and other processes.

Cast basalt have an excellent performance of high abrasive and high corrosion resistance. Cast basalt products mainly include cast basalt tile, cast basalt pipe, cast basalt lined steel pipe, clamp cast basalt pipe, cast basalt wear-resistant slip joints, cast basalt wear-resistant valves, cast basalt powder and various wear-resistant corrosion-resistant cement which use cast basalt powder as raw material. Cast basalt products have been widely used in industrial sectors which have serious wear and corrosion of parts and equipment, such as electric power, mining, metallurgy, coal, chemicals, construction and so on. Cast basalt is an indispensable non-metallic industrial new material in the development of modern industry.

Friction Resistance – As more material is passed over Cast Basalt it gets polished up thereby reducing friction further. Cast Basalt improves in service after getting polished. Wetting also improves its performance in practical applications.

Impact Resistance – Direct Impact Resistance at 90 degree is low like all other ceramics, but it can be increased with proper installation by reducing the angle of impact. Cast Basalt is the best wherever sliding abrasion exists. Moreover, external impact strength of composite basalt pipe (enclosed in M.S. Shell) is always more than that of bare Ni-hard Pipe.

Centrifugal casting moulding of cast basalt pipe

Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers. It combines the advantages of cast basalt and steel pipe, wear resistance, corrosion resistance, anti-high-pressure, transportation and easy installation. Water transport in plant ash and metal mine tailings pipeline hydraulic conveyance system applying this product can life up to 30 years. Cast basalt lined steel pipe is divided into straight tube, elbow, tee, reducer pipe.

There are always wear and tear of equipment and materials in industrial production.

With the rapid development of modern industry, the equipment running faster and faster, the wear rate is also faster and more serious. Equipment or material life has become an important factor which restricts enterprises to improve production efficiency.

In most cases, the biggest cost for a company is lost production time due to unplanned downtime. Effective use of suitable wear-resistant materials can reduce the frequency of unexpected shutdowns in the production process, extend production time, and reduce company costs.

According to statistics, each year in metallurgy, mining, electricity, coal industry, because of wear of equipment and materials caused losses amounting to 40 billion.

Although the wear and tear of materials or equipment hardly leads to catastrophic events, the accumulation of energy and material consumption is phenomenal. In many basic industries, material transportation and equipment wear and tear exist simultaneously.
The loss caused by wear and tear is not only the initial equipment investment, but the more serious loss caused by unplanned downtime is the swallowing of corporate assets.

High resistant silicon carbide ceramic lined steel tubes with SiC for gold and iron ore and copper and steel plant and power plant.

Related cast basalt products

basalt lined pipe

Cast basalt lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers.

Cast Basalt tile

Cast basalt is a mineral material produced by melting natural basalt at a temperature of approximately 1300°C, followed by casting into moulds.

Basalt tile lined pipe

Cast basalt tile lined steel pipe is composed by lined with cast basalt tiles, outside steel pipe and cement mortar filling between the two layers.

Cast Basalt pipe

A cast basalt pipe is made by a volcanic rock, which is cast in a similar method to that of cast iron.

Cast basalt process

The product processed from cast basalt is a new type of silicate crystalline material. Using natural rock (basic database, shale, etc.) or industrial waste as the main raw material components, smelting, casting, heat treatment and other processes are regularly arranged, crystalline, hard, and fine-textured metal industrial materials. Casting basalt has an excellent high abrasion and high resistance. Abrasiveness. Corrosion resistance.

Chemical substance ( weight %) of cast basalt

SiO2Al2O2Fe2O3TiO2CaOMgOK2ONa2OFeOP2O5
43.13-41.1212.5-13.528.64-9.52.02-2.629.05-10.228.65-10.471.4-1.754.62-5.284.82-6.251.1-1.38

Physical performance of cast basalt products

CategoryAttribute
Density3g/cm3
Compressive Strength≥ 450MPa
Bending strength≥ 60MPa
Impact strength1.76KJ/M2
Abrasive strength0.07g/cm2
Vickers scale≥ 720kg/mm
Elasticity modulus1.67x105MPa
Dilatation coefficient (60℃)8.92x10-6
Chemical Attack Resistance
95%-98% H2SO4 ≥ 98%
20%H2S4 ≥ 94%
20 %NaOH≥ 98%

Classification, structure and industry application of

Why Are Cast Basalt Lined Pipes So Wear-Resistant

The molding process of cast basalt lined pipe includes solution casting, sintering and thermal direct sintering.

Tech& service of cast basalt lined steel pipe

What causes the problems of cast basalt composite pipe?

Cast basalt valve factory analysis cast basalt composite pipe before leaving the factory, the cast basalt pipe valve shall conduct mechanical performance test, flattening test and flaring test, and the cast basalt composite pipe shall meet the requirements of specifications and rules. The quality inspection method of cast basalt composite pipe is as follows: the…

Read more

ASME ANSI B36.10/ASME ANSI B36.19 specifications

ANSI: American standard systemB36.10: seamless steel pipe and welded steel pipe ANSI B36.10 Wall thickness levels are:Sch10, Sch20, Sch30, Sch40, Sch60, Sch80, Sch100, Sch120, Sch140, Sch160 ten levels. B36.19: stainless steel tubeANSI B36.19 Wall thickness grade: Sch5s, Sch10s, Sch40s, Sch80s four grades.ASME / ANSI B36.10 seamless steel pipe and welded steel pipe and ASME / ANSI B36.19 stainless steel pipe: steel…

Read more

Packing & delivery

Cast basalt pipe adopts foam packaging, then in accordance with the specifications to put them into wooden cases, sometimes they can be directly loaded into the compartment or container.

Frequently Asked Questions

FAQ

How long is your delivery time?

The delivery time of customized products is generally 25 35 days, and non customized products are generally shipped within 24 hours after payment.

What are your payment terms?

T/T 30% as the deposit,The balance payment is paid in full before shipment

What is your minimum order quantity?

There is no minimum order quantity requirement. Customized products are tailor made according to the drawings provided by the customer.

Do you provide samples? Is it free?

If the value of the sample is low, we will provide it for free, but the freight needs to be paid by the customer. But for some high value samples, we need to charge a fee.

What is the packaging and transportation form?

Non steaming wooden box and iron frame packaging. Special packaging is available according to customer needs. The transportation is mainly by sea.

Inspections

As part of our quality regimen, 100% of incoming raw materials, semi-finished products, as well as finished products are thoroughly inspected prior to being entered into our inventory. We have established multiple hold points throughout fabrication as well as a comprehensive final inspection for all products.

Need to inquire about our products? Fill out the form below and our staff will be in touch!
Contact Form Demo

Why Do I Need Wear Parts?

“Wear” is the last thing any business wants to experience with their machines. Apart from its unpleasant physicality, it could also be a sign that means your parts and/or components are about to break. You need wear parts to help prevent or prolong the wearing out of these parts and components – and that could be any type of wear parts such as pipes, liners, plates, etc.

What Kinds of Wear Plates Do You Offer?

Here at Sunny Steel, we put emphasis to the primary kinds and types of wear pipes and fittings – they include:
  • Ceramic Liner pipes and fittings
  • Ceramic tile lined pipes and fittings
  • Ceramic sleeve lined pipes and fittings
  • Cast basalt lined pipes and fittings
All of them have their particular uses, but these cover almost all the materials companies need to work on.

Merits and Salient Features

  • Extremely High Resistant to Abrasion, Erosion and Corrosion.
  • Resistant to most of the Chemicals, Alkalis and Acids.
  • Very Long life
  • Less Down time and Maintenance Cost.

Thermal power stations – raw coal chutes/ hoppers, feed bunker/coal bunker, ash pits, crushers, bottom ash, disposal slurry, dust lines/ bends, pipeline/bends, fly ash. Trenches below hopper and pipelines, pulverized coal piping.

Cement plants – dynamic air separators, raw mill ducts/ chutes, drag chain conveyor, grate cooler housing, air separator/ cyclones, coal handling, coal hopper/ chutes, cement conveying, slurry lines/ bends lines/ bends, discharge boxes / bankers, lime/silica hoppers/chutes, chain conveyor housing, mixers/nozzles, coal ventury.

Steel plants – coke sorting unit, coal bunkers / sinter bunkers, lime bunkers, coke breeze, sinter plant cyclones, sinter plant flow conveyors, iron slurry line, thick slurry lines, air lift pipes, telescopic pipes, granulated slag, hot mill flume.

Coal washeries – coal washing plants, coal transportation, conveyor chutes/pipes, floatation cells, media sumps, centrifuges, cyclones, sieves.

Exit mobile version