fbpx

Ceramic sleeve lined pipe tee

The Ceramic sleeve lined tee is pasted on the inner wall of the steel part of the tee by an alumina monolithic ceramic tube or a ceramic patch and a high strength and high temperature adhesive.

Please send your inquiry by   sales@sunnysteel.com

Description

The Ceramic sleeve lined tee is pasted on the inner wall of the steel part of the tee by an alumina monolithic ceramic tube or a ceramic patch and a high strength and high temperature adhesive. The pipe consists of three layers: smooth ceramic lining (compact corundum), ceramic and metal transition layer and the outer steel pipe.

Wear resistant alumina ceramic sleeve welded in steel pipes

wear resistant ceramic ring inner001

wear resistant ceramic ring inner002

wear resistant ceramic ring inner003

These ceramic sleeves are identical to the ones we use in our production, so high quality, consistency, and uniformity are assured.

Alumina ceramic specifications

Items92%95%
Al2O3≥92%≥95%
SiO20.04510.028
Fe2O30.00010.0001
TiO20.0005/
CaO0.0180.0045
MgO0.0110.0051
K2O0.00040.0003
Na2O0.00310.0063
Volume Density3.62 g/cm33.65 g/cm3
Water Absorption (%)≤0.02%≤0.02%
POROSITY≤1≤1
Hardness9 Mohs9 Mohs
Flexural strength≥2000 Mpa≥2250 Mpa
Abrasion≤0.02≤0.02

The combination of high rigidity of ceramic and high elasticity of steel gives the pipe unmatchable features as an abrasion resistant, heat resistant and corrosion resistant material for use in the fields of power generation, metallurgy, mining, and chemical industry etc. It has many advantages over steel pipes, cast stone pipes, and steel-plastic compound pipes.

Layer size of ceramic sleeve lined pipe

ItemMaterialThicknessDiameter
Steel pipenormal carbon steel or stainless steel3-10mmDN30-DN400mm
AdhesiveEpoxy adhesive2-3mm
Ceramic sleeve92%,95%,99%5-20mmDN30-DN400mm
The ceramic sleeve lined pipe has a smooth inner wall, excellent tightness as well as good wear and chemical resistance ability.

The most common applications of ceramic sleeve lined pipes

IndustryMaterial
1. Abrasive productsGrinding wheel granules
2. Aluminium plantsCalcined alumina, bauxite, electrode, carbon, crushed bath
3. Iron & SteelSinter dust, limestone, lime injection, coal, iron carbide, alloy additives
4. Mineral wool & insulation productsPerlite, stone dust, refractory fibers, production wastes, dust from sawing operations
5. FoundriesMolding sand, dust collection
6. Glass plantsBatch, cullet, quartz, kaoline, feldspar
7. Breweries, grain processing, feed millsCorn, barley, soy beans, malt, cocoa beans, sunflower seeds, rice hulls, malting plants
8. CementClinker dust, limestone, cement, fly ash, coal, blast furnace slag
9. Chemical plantsCaustic lime, fertilizers, lime dust, chrome ore, paint pigments, plastic pallets with glass fi bers
10. Mineral mining plantsKiln feed, ore concentrate, coal tailings, dust
11. Coal fired power stationsCoal, fly ash, pyrites, slag, ash, limestone
12. Coal minesCoal dust, mine waste for backfi lling
13. Technical carbon productsTechnical carbon, dust, graphite for electrodes

Ceramic sleeve

Recently 95% alumina ceramic sleeve lined pipes, elbows and T pipes have been largely applied in lithium battery material conveying system. The main raw material of wear resistant ceramic sleeve is a special kind of ceramic with AL2O3 as the and the rare metal oxide as the flux, which is melted by high temperature at 1700 °C. The big diameter ceramic sleeve is always a big problem for the ceramic tube manufacturers since it’s very difficult to control the deformation rate of the ceramic sleeve after it’s sintering. Also It will also need an advanced and big isostatic pressing machine to do this. So it will not only express the company’s production capability, but company’s technology. Right now, our factory have owned both advantages which are wear resistant ceramic pressing facilities and technologies.

In addition, the flatness of ceramic casing is also an important factor affecting the size of lithium battery materials.We did a lot of analysis and improved our manufacturing techniques to solve both of these problems. Now it can help lithium battery delivery systems better solve these problems, with better material purity, longer service life and better economic benefits.

Technical index of wear-resistant ceramic sleeve

ItemDataNote
Al2O3 (%)≥95%
Density (g/cm3)≥3.65g/cm3
Strength (MPa)1030
Flexural strength (MPa)212
Impact toughness (Kj/m2)10.2
Hardness (HRV)≥85Mpa
Elastic modulus (GPa)304
Expansion coefficient (10-6/℃)6.6
Acid resistance(24H)StabilityTest solution: 15%H2SO4
Alkali resistance(24H)StabilityTest solution:NaOH

Process

Removing rust and decontamination process of outer-layer steel pipe;

Must be in strict accordance with the prescribed ratio, the binder ab accurate measurement, with how many, must be stirred evenly, full stir-mixing must not be less than 4 times, such as adding a mixture of the embedded feed should be mixed with the binder and then add the mixture to stir up not less than 3 times;

The binder is applied evenly on the inner wall of the steel tube to ensure the thickness is not less than 0.5mm thickness. Then apply the binder on the outer surface of the ceramic ring to ensure the thickness between the 0.5mm-1mm. Also in the ceramic ring side (with the ceramic ring contact with the corresponding surface) Daub 0.5mm Adhesive, to ensure that after the installation of the ring and the seal between the ring;

After the installation of the ceramic ring in place, it is necessary to repair the gap between the assembled ceramic rings and mend the joints to ensure the sealing between the ring and the ring;

According to the NPT standard, we process the two pipe ends of male and female thread processing. The end of the pipe processing, and processing 1×45° groove, to prevent on-site installation in the process of cutting the hands of construction workers, do a good job of safety protection measures, thread processing, need to brush oil to protect the thread;

After installing the ceramic ring, check the internal surface of the ceramic ring of the formation, finishing in place, cannot move the position of the pipe, because the binder is not dry, vibration is easily caused by the displacement of ceramic rings, affect the use of the effect of cold weather in winter, binder drying time is longer, need to ensure more than 48 hours.

Technical index of binder

ItemDataCharacteristics of binder
Density (g/cm3)1.32Megapoxy binder
Compressive strength (MPa)40
Shear Strength MPa26
Impact toughness Kj/m210
Hardness HB9.5
Elastic Modulus GPa2.2
Expansion coefficient 10-6/℃20.1
Softening temperature℃263
Coking temperature℃335
Acid resistance(24H)StabilityTest solution : 15%H2SO4
Alkali resistance(24H)StabilityTest solution: NaOH
We use the Australian Megapoxy high strength structural adhesive, this structural glue is modified epoxy resin polymer, anti-aging ability, and wear-resistant ceramic bonding to form a strong and cushion of the anti-wear layer, cured water, anti-corrosion performance is excellent, toughness, displacement-resistant effect is remarkable.

Inquiry

Need to inquire about our products? Fill out the form below and our staff will be in touch!

Contact Form Demo

FAQ

Q: How long is your delivery time?
A: The delivery time of customized products is generally 25 35 days, and non customized products are generally shipped within 24 hours after payment.

Q: Do you provide samples? Is it free?
A: If the value of the sample is low, we will provide it for free, but the freight needs to be paid by the customer. But for some high value samples, we need to charge a fee.

Q: What are your payment terms?
A: T/T 30% as the deposit,The balance payment is paid in full before shipment

Q: What is the packaging and transportation form?
A: Non steaming wooden box and iron frame packaging. Special packaging is available according to customer needs. The transportation is mainly by sea.

Q: What is your minimum order quantity?
A: There is no minimum order quantity requirement. Customized products are tailor made according to the drawings provided by the customer.