Stainless pipes & tubes

Material stainless pipes & tubes grades

Comparison table of stainless steel brands of various countries

In order to solve the cumbersome and difficult to remember stainless steel grades, improve the practicability of the brand representation, and the contrast with the international standard grades, China has formulated the "Universal Code System for Steel and Alloy Grades", such as 06Cr19Ni10, corresponding to 304. Different grades of stainless steel have different ingredients, but they all have a national standard. The standards of each country are also different.

The specific standards of each country are as follows

No	China,GB		Japan	American		Korea	EUR	India	Australia	Tai Wan
	Old	New（07.10）	JIS	ASTM	UNS	KS	BS EN	IS	IS	CNS
Austenitic stainless steel
1	1Cr17Mn6Ni5N	12Cr17Mn6Ni5N	SUS201	201	S20100	STS201	1.4372	10Cr17Mn6Ni4N20	201-2	201
2	1Cr18Mn8Ni5N	12Cr18Mn9Ni5N	SUS202	202	S20200	STS202	1.4373		-	202
3	1Cr17Ni7	12Cr17Ni7	SUS301	301	S30100	STS301	1.4319	10Cr17Ni7	301	301
4	0Cr18Ni9	06Cr19Ni10	SUS304	304	S30400	STS304	1.4301	07Cr18Ni9	304	304
5	00Cr19Ni10	022Cr19Ni10	SUS304L	304L	S30403	STS304L	1.4306	02Cr18Ni11	304L	304L
6	0Cr19Ni9N	06Cr19Ni10N	SUS304N1	304N	S30451	STS304N1	1.4315	-	304N1	304N1
7	0Cr19Ni10NbN	06Cr19Ni9NbN	SUS304N2	XM21	S30452	STS304N2	-	-	304N2	304N2
8	00Cr18Ni10N	022Cr19Ni10N	SUS304LN	304LN	S30453	STS304LN	-	-	304LN	304LN
9	1Cr18Ni12	10Cr18Ni12	SUS305	305	S30500	STS305	1.4303	-	305	305
10	0Cr23Ni13	06Cr23Ni13	SUS309S	309S	S30908	STS309S	1.4833	-	309S	309S
11	0Cr25Ni20	06Cr25Ni20	SUS310S	310S	S31008	STS310S	1.4845	-	310S	310S
12	0Cr17Ni12Mo2	06Cr17Ni12Mo2	SUS316	316	S31600	STS316	1.4401	04Cr17Ni12Mo2	316	316
13	0Cr18Ni12Mo3Ti	06Cr17Ni12Mo2Ti	SUS316Ti	316Ti	S31635	-	1.4571	04Cr17Ni12MoTi20	316Ti	316Ti
14	00Cr17Ni14Mo2	022Cr17Ni12Mo2	SUS316L	316L	S31603	STS316L	1.4404	-02Cr17Ni12Mo2	316L	316L
15	0Cr17Ni12Mo2N	06Cr17Ni12Mo2N	SUS316N	316N	S31651	STS316N	-	-	316N	316N
16	00Cr17Ni13Mo2N	022Cr17Ni13Mo2N	SUS316LN	316LN	S31653	STS316LN	1.4429	-	316LN	316LN
17	0Cr18Ni12Mo2Cu2	06Cr18Ni12Mo2Cu2	SUS316J1	-	-	STS316J1	-	-	316J1	316J1
18	00Cr18Ni14Mo2Cu2	022Cr18Ni14Mo2Cu2	SUS316J1L	-	-	STS316J1L	-	-	-	316J1L
19	0Cr19Ni13Mo3	06Cr19Ni13Mo3	SUS317	317	S31700	STS317	-	-	317	317
20	00Cr19Ni13Mo3	022Cr19Ni13Mo3	SUS317L	317L	S31703	STS317L	1.4438	-	317L	317L
21	0Cr18Ni10Ti	06Cr18Ni11Ti	SUS321	321	S32100	STS321	1.4541	04Cr18Ni10Ti20	321	321
22	0Cr18Ni11Nb	06Cr18Ni11Nb	SUS347	347	S34700	STS347	1.455	04Cr18Ni10Nb40	347	347
Austenitic ferritic stainless steel (duplex stainless steel)
23	0Cr26Ni5Mo2	-	SUS329J1	329	S32900	STS329J1	1.4477	-	329J1	329J1
24	00Cr18Ni5Mo3Si2	022Cr19Ni5Mo3Si2N	SUS329J3L	-	S31803	STS329J3L	1.4462	-	329J3L	329J3L
0Cr18Ni10Ti Iron type stainless steel
25	0Crl3Al	06Crl3Al	SUS405	405	S40500	STS405	1.4002	04Cr13	405	405
26	-	022Cr11Ti	SUH409	409	S40900	STS409	1.4512	-	409L	409L
27	00Cr12	022Cr12	SUS410L	-	-	STS410L	-	-	410L	410L
28	1Cr17	10Cr17	SUS430	430	S43000	STS430	1.4016	05Cr17	430	430
29	1Cr17Mo	10Cr17Mo	SUS434	434	S43400	STS434	1.4113	-	434	434
30	-	022Cr18NbTi	-	-	S43940	-	1.4509	-	439	439
31	00Cr18Mo2	019Cr19Mo2NbTi	SUS444	444	S44400	STS444	1.4521	-	444	444
Martensitic stainless steel
32	1Cr12	12Cr12	SUS403	403	S40300	STS403	-	-	403	403
33	1Cr13	12Cr13	SUS410	410	S41000	STS410	1.4006	12Cr13	410	410
34	2Cr13	20Cr13	SUS420J1	420	S42000	STS420J1	1.4021	20Cr13	420	420J1
35	3Cr13	30Cr13	SUS420J2	-	-	STS420J2	1.4028	30 Cr13	420J2	420J2
36	7Cr17	68Cr17	SUS440A	440A	S44002	STS440A	-	-	440A	440A

Stainless pipes & tubes Tolerance

In the production process, because the actual size is difficult to meet the nominal pipe size requirement, that is, it is often larger or smaller than the nominal size, so the standard stipulates that there is a difference between the actual size and the nominal size of the stainless steel pipe. A positive difference is called a positive deviation, and a negative difference is called a negative deviation.

Outside diameter (OD), wall thickness and length are three basic parameters in the process of manufacture and distribution for stainless steel tube & pipe, and these parameters have been standardized.

Outer diameter and wall thickness are particularly important, they are not only the basic support for meeting the design requirements of various types of applications such as strength, stiffness and fluid delivery, but also have a decisive influence on the subsequent processing, therefore, standards for stainless steel tube & pipe diameter and wall thickness of the manufacturing accuracy (tolerance) should been standardized.

A. Nominal Pipe size: It is the nominal size specified in the standard such ASME B36.10m, ASME B36.19m, the ideal size that users and manufacturers hope to obtain, and the order size specified in the contract.

B. Actual Pipe size: It is the actual size obtained during the production process, which is often larger or smaller than the nominal size. This phenomenon of being larger or smaller than the nominal size is called deviation.

European Standard

European stainless steel tube & pipe standards specify 4 classes outer diameter and wall thickness in percentage or absolute value on the basis of nominal dimension.
Generally, larger diameter or heavy wall thickness stainless steel pipe use percentage, small diameter or thin wall thickness stainless steel tube use absolute value.

Standard	Manufacturing Process & Type	Outer Diameter Tolerance		Wall Thickness Tolerance	Others
		OD (Mm)	Class	（%)
EN10216-5	Hot Finished Seamless Tube	219.1-610	D1	+22.5%T，-15%T	T/D≤0.05
				T1	T/D≤0.09
				T2	T/D>0.09
		30-219.1	D2	T1
				T2
	Cold Finished Seamless Tubes	≤219.1	D3	T3
			D4	T4	Agreement
EN10297-2	Hot Finished Seamless Tube		D1	T1
			D2	T2	Agreement
	Cold Finished Seamless Tubes		D3	T3
			D4	T4	Agreement
EN10217-7	Welded Tubes	>168.3	D2	T3
		≤168.3	D3	T3
			D4	T3	Agreement
EN10296-2	Welded Tubes	>168.3	D2	T3
		≤168.3	D3	T3
		≤114.3	D4	T3	Agreement
EN10312	Welded Tubes	Series 1	D4	T3	T=0.6-2 Mm
		Series 2	D3 – D4	T3 – T4	T=1-3 Mm

From D1 to D4 class for outer diameter, and T1 to T4 for wall thickness tolerance comply to DIN EN ISO 1127 standard, stainless steel tubes – Dimensions, tolerances and conventional masses per unit length.

Stainless Steel Density

Stainless steel density refers to substance mass per unit volume, it is one of typical property of stainless steel, commonly, density of stainless steel range from 7600 kg/m3 to 8000 kg/m3.

Stainless steel is a wide used material, containing at least 10.5% of Chromium, and other elements added to form stainless steel structure, these elements have Carbon, Silicon, Manganese, Phosphorus, Sulfur, Nickel, Molybdenum, Titanium and Copper, it is noted as high strength and excellent corrosion resistance.

Densities change depending on these alloy elements changing, different alloy content have different density value, even it is the same grade, it is difficult to calculate accurate density values, theoretic density value is given below for reference.

The following is the comparison of several commonly used stainless steel density, data may not be completely accurate, only for reference.

• Material 201, 202, 301, 302, 304, 304L, 305, 321
• Density 7.93 7.93 7.93 7.93 7.93 7.93 7.93 7.93

Seamless tubes are generally made in complex steps starting with the drilled hollows from billets, by cold drawing and cold rolling manufacturing process with cold drawing & cold rolling machines.

Stainless steel grades listed in the international standard ISO 15510:2010

Comparative designations of grades with similar composition from other important standards.
(listed by type of steel structure and by increasing intermediate 3-digits code of the ISO name)

Type	ISO-Name (1)	ISO Designation	EN	UNS	AISI	JIS	GB(国标)
M	4119-410-92-C	X13CrMo13	1.4119()			SUS410J1	S45710
M	4024-410-09-E	X15Cr13	1.4024			SUS410
M	4006-410-00-I	X12Cr13	1.4006	S41000	410	SUS410	S41010
M	4415-415-92-E	X2CrNiMoV13-5-2	1.4415
M	4313-415-00-I	X3CrNiMo13-4	1.4313	S41500		SUSF6NM	S41595
M	4642-416-72-J	X13CrPb13	1.4642()			SUS410F2
M	4005-416-00-I	X12CrS13	1.4005	S41600	416	SUS416	S41617
M	4038-420-00-I	X52Cr13	1.4038()	S42000
M	4039-420-09-I	X60Cr13	1.4039()
M	4419-420-97-E	X38CrMo14	1.4419				S35830
M	4110-420-69-E	X55CrMo14	1.411
M	4116-420-77-E	X50CrMoV15	1.4116
M	4035-420-74-E	X46CrS13	1.4035
M	4034-420-00-I	X46Cr13	1.4034	S42000			S42040
M	4643-420-72-J	X33CrPb13	1.4643()			SUS420F2
M	4029-420-20-I	X33CrS13	1.4029	S42020	420F	SUS420F	S42037
M	4031-420-00-I	X39Cr13	1.4031	S42000	420		S42040
M	4028-420-00-I	X30Cr1 3	1.4028	S42000	420	SUS420J2	S42030
M	4021-420-00-I	X20Cr13	1.4021	S42000	420	SUS420J1	S42020
M	4923-422-77-E	X22CrMoNiV12-1	1.4923
M	4929-422-00-I	X23CrMoWMnNiV12-1-1	1.4929()	S42200	422	SUH616	S47220
M	4058-429-99-J	X33Cr16	1.4058()			SUS429J1
M	4019-430-20-I	X14CrS17	1.4019,1.4104	S43020	430F		S11717
M	4418-431-77-E	X4CrNiMo16-5-1	1.4418
M	4123-431-77-E	X40CrMoVN16-2	1.4123
M	4057-431-00-X	X17CrNi16-2	1.4057	S43100	431	SUS431	S43120
M	4122-434-09-I	X39CrMo17-1	1.4122
M	4766-440-77-X	X80CrSiNi20-2	1.4766()			SUH4	S48380
M	4025-440-74-J	X110CrS17	1.4025()		"440F"	SUS440F	S44097
M	4023-440-04-I	X110Cr17	1.4023()	S44004	440C	SUS440C	S44096
M	4041-440-03-X	X85Cr17	1.4041()	S44003	440B	SUS440B	S44080
M	4040-440-02-X	X68Cr17	1.4040()	S44002	440A	SUS440A	S44070
M	4916-600-77-J	X18CrMnMoNbVN12	1.4916()			SUH600	S46250
M-PH	4534-138-00-X	X3CrNiMoAl13-8-3	1.4534	S13800			S51380
M-PH	4594-155-92-E	X5CrNiMoCuNb14-5	1.4594
M-PH	4532-157-00-I	X8CrNiMoAl15-7-2	1.4532	S15700			S51570
M-PH	4542-174-00-I	X5CrNiCuNb16-4	1.4542	S17400	"630"	SUS630	S51740
M-PH	4568-177-00-I	X7CrNiAl17-7	1.4568	S17700	"631"	SUS631	S51700
M-PH	4457-350-00-X	X9CrNiMoN17-5-3	1.4457()	S35000			S51750
M-PH	4530-455-77-E	X1CrNiMoAlTi12-9-2	1.453
M-PH	4596-455-77-E	X1CrNiMoAlTi12-10-2	1.4596
M-PH	4645-469-10-U	X2CrNiMoCu AlTi12-9-4-3 *)	1.4645()	S46910
M-PH	4644-662-20-U	X4NiCrMoTiMnSiB26-14-3-2	1.4644()	S66220
F	4523-182-35-I	X2CrMoTiS18-2	1.4523	S18235
F	4724-405-77-I	X10CrAlSi13	1.4724
F	4002-405-00-I	X6CrAl13	1.4002	S40500	405	SUS405	S11348
F	4516-409-75-I	X6CrNiTi12	1.4516	S40975
F	4720-409-00-I	X2CrTi12	1.472	S40900	409	SUH409L	S11163
F	4030-410-90-X	X2Cr12	1.4030()			SUS410L	S11203
F	4003-410-77-I	X2CrNi12	1.4003	S41003			S11213
F	4000-410-08-I	X6Cr13	1.4	S41008		SUS410S	S41008
F	4595-429-71-I	X1CrNb15	1.4595
F	4589-429-70-E	X5CrNiMoTi15-2	1.4589
F	4012-429-00-X	X10Cr15	1.4012()	S42900	429	SUS429	S11510
F	4742-430-77-I	X10CrAlSi18	1.4742
F	4017-430-91-E	X6CrNi17-1	1.4017
F	4511-430-71-I	X3CrNb17	1.4511			SUS430LX
F	4664-430-75-J	X2CrCuTi18	1.4664()			SUS430J1L
F	4520-430-70-I	X2CrTi17	1.452			SUS430LX
F	4510-430-35-I	X3CrTi17	1.451	S43035	439	SUS430LX	S11863
F	4004-430-20-I	X7CrS17	1.4004()	S43020	430F	SUS430F	S11717
F	4016-430-00-I	X6Cr17	1.4016	S43000	430	SUS430	S11710
F	4113-434-00-I	X6CrMo17-1	1.4113	S43400	434	SUS434	S11790
F	4609-436-77-J	X2CrMo19	1.4609()			SUS436J1L
F	4513-436-00-J	X2CrMoNbTi18-1	1.4513()	S43600	436	SUS436L	S11862
F	4526-436-00-I	X6CrMoNb17-1	1.4526	S43600	436		S11770
F	4509-439-40-X	X2CrTiNb18	1.4509	S43940		SUS430LX	S11873
F	4764-442-72-J	X8CrAl19-3	1.4764()			SUH21
F	4521-444-00-I	X2CrMoTi18-2	1.4521	S44400	444	SUS444	S11972
F	4621-445-00-E	X2CrNbCu21	1.4621	S44500
F	4128-445-92-J	X2CrMo23-1	1.4128()
F	4762-445-72-I	X10CrAlSi25	1.4762
F	4129-445-92-J	X2CrMo23-2	1.4129()
F	4750-446-60-U	X2CrMoNi27-4-2	1.4750()	S44660
F	4131-446-92-C	X1CrMo26-1	1.4131(),1.4749	S44627		SUSXM27	S12791
F	4749-446-00-I	X15CrN26	1.4749	S44600	446	SUH446	S12550
F	4135-447-92-C	X1CrMo30-2	1.4135()	S44700		SUS447J1	S13091
A	4615-201-75-E	X3CrMnNiCu 15-8-5-3 *)	1.4615
A	4371-201-53-I	X2CrMnNiN17-7-5	1.4371	S20153
A	4618-201-76-E	X9CrMnNiCu 17-8-5-2	1.4618
A	4617-201-76-J	X6CrNiMnCu17-8-4-2	1.4617()			SUS304J2
A	4372-201-00-I	X12CrMnNiN17-7-5	1.4372	S20100	201	SUS201	S35350
A	4369-202-91-I	X11CrNiMnN19-8-6	1.4369
A	4890-202-09-X	X53CrMnNiN21-9-4	1.4890()			SUH35	S35650
A	4373-202-00-I	X12CrMnNiN18-9-5	1.4373	S20200	202	SUS202	S35450
A	4597-204-76-I	X8CrMnCuN17-8-3	1.4597
A	4982-215-00-E	X10CrNiMoMnNbVB15-10-1	1.4982	S21500
A	4318-301-53-I	X2CrNiN18-7	1.4318	S30153	"301LN"	SUS301L	S30153
A	4319-301-00-I	X5CrNi17-7	1.4319	S30100	301	SUS301	S30110
A	4310-301-00-I	X10CrNi18-8	1.431	S30100	301		S30110
A	4326-302-15-I	X12CrNiSi18-9-3	1.4326()	S30215	"302Si"	SUS302B	S30240
A	4325-302-00-E	X9CrNi18-9	1.4325	S30200	302	SUS302	S30210
A	4667-303-76-J	X12CrNiCuS18-9	1.4667()[1.4570]		"303Cu"	SUS303Cu
A	4625-303-23-X	X12CrNiSe18-9	1.4625()	S30323	303Se	SUS303Se	S30327
A	4305-303-00-I	X10CrNiS18-9	1.4305	S30300	303	SUS303	S30317
A	4570-303-31-I	X6CrNiCuS18-9-2	1.457	S30331	"303Cu+"
A	4567-304-30-I	X3CrNiCu18-9-4	1.4567	S30430		SUSXM7	S30488
A	4818-304-15-E	X6CrNiSiNCe19-10	1.4818	S30415			S30450
A	4567-304-76-I	X6CrNiCu17-8-2	1.4567			SUS304J1	S30480
A	4311-304-53-I	X2CrNiN18-9	1.4311	S30453	"304LN"	SUS304LN	S30453
A	4650-304-75-E	X2CrNiCu19-10	1.465		"304LCu"	SUS304L	S30403
A	4948-304-09-I	X7CrNi18-9	1.4948	S30409	"304H"		S30409
A	4567-304-98-X	X6CrNiCu18-9-2	1.4567	S30431	"304Cu"	SUS304J3	S30480
A	4649-304-76-J	X6CrNiCu19-9-1	1.4649()		"304Cu"	SUS304Cu	S30488
A	4315-304-51-I	X5CrNiN19-9	1.4315	S30451	304N	SUS304N1	S30458
A	4306-304-03-I	X2CrNi19-11	1.4306	S30403	304L	SUS304L	S30403
A	4307-304-03-I	X2CrNi18-9	1.4307,[1.4306]	S30403	304L	SUS304L	S30403
A	4301-304-00-I	X5CrNi18-9	1.4301	S30400	304	SUS304	S30408
A	4828-305-09-I	X15CrNiSi20-12	1.4828
A	4884-305-00-X	X6CrNiSi18-13-4	1.4884()	S30500		SUSXM15J1	S38148
A	4303-305-00-I	X6CrNi18-12	1.4303	S30500	305	SUS305	S30510
A	4835-308-15-U	X7CrNiSiNCe21-11	1.4835	S30815
A	4824-308-09-J	X20CrNiN22-11	1.4824()			SUH37	S30850
A	4496-309-51-J	X4CrNiMoN25-14-1	1.4496()			SUS317J2
A	4833-309-08-I	X18CrNi23-13	1.4833	S30908	"309S"	SUH309	S30908
A	4950-309-08-E	X6CrNi23-13	1.495	S30908	309S	SUS309S	S30908
A	4537-310-92-E	X1CrNiMoCuN25-25-5	1.4537
A	4335-310-02-I	X1CrNi25-21	1.4335	S31002
A	4466-310-50-E	X1CrNiMoN25-22-2	1.4466	S31050			S31053
A	4845-310-08-E	X8CrNi25-21	1.4845	S31008	"310S"	SUS310S	S31008
A	4845-310-09-X	X23CrNi25-21	1.4845	S31008	"310S"	SUH310	S31020
A	4951-310-08-I	X6CrNi25-20	1.4951	S31008	310S	SUS310S	S31008
A	4659-312-66-I	X1CrNiMoCuNW24-22-6	1.4659	S31266
A	4547-312-54-I	X1CrNiMoCuN20-18-7	1.4547	S31254		SUS312L	S31252
A	4971-314-79-I	X5CrNiCoMoWMnVNNb21-20-20-3-3-2	1.4971			SUH661
A	4841-314-00-E	X15CrNiSi25-21	1.4841	S31400	314
A	4660-315-77-I	X6CrNiCuSiMo19-10-3-2	1.4660()			SUS315J1
A	4648-315-77-I	X6CrNiSiCuMo19-13-3-3-1	1.4648()			SUS315J2
A	4665-316-76-J	X6CrNiMoCu18-12-2-2	1.4665()			SUS316J1
A	4571-316-35-I	X6CrNiMoTi17-12-2	1.4571	S31635		SUS316Ti	S31668
A	4449-316-76-E	X3CrNiMo18-12-3	1.4449
A	4647-316-75-X	X2CrNiMoCu18-14-2-2	1.4647()			SUS316J1L	S31683
A	4432-316-03-I	X2CrNiMo17-12-3	1.4432	S31603		SUS316L	S31603
A	4580-316-40-I	X6CrNiMoNb17-12-2	1.458	S31640			S31678
A	4867-316-77-J	X40CrNi1 5-14	1.4867()			SUH31
A	4578-316-76-E	X3CrNiCuMo17-11-3-2	1.4578
A	4910-316-77-E	X3CrNiMoBN17-13-3	1.491
A	4429-316-53-I	X2CrNiMoN17-12-3	1.4429	S31653	"316LN"	SUS316LN	S31653
A	4406-316-53-I	X2CrNiMoN17-11-2	1.4406	S31653	"316LN"	SUS316LN	S31653
A	4495-316-51-J	X6CrNiMoN17-12-3	1.4495()	S31651	316N	SUS316N	S31658
A	4435-316-91-I	X2CrNiMo18-14-3	1.4435	S31603	316L	SUS316L	S31603
A	4404-316-03-I	X2CrNiMo17-12-2	1.4404	S31603	316L	SUS316L	S31603
A	4494-316-74-J	X6CrNiMoS17-12-3	1.4494()	S31620	316F	SUS316F
A	4401-316-00-I	X5CrNiMo17-12-2	1.4401	S31600	316	SUS316	S31608
A	4436-316-00-I	X3CrNiMo17-12-3	1.4436	S31600	316	SUS316	S31608
A	4476-317-92-X	X3CrNiMo18-16-5	1.4476()			SUS317J1	S31794
A	4438-317-03-I	X2CrNiMo19-14-4	1.4438	S31703		SUS317L	S31703
A	4483-317-26-I	X2CrNiMoN18-15-5	1.4483()	S31726			S31723
A	4879-317-77-J	X30CrNiMoPB20-11-2	1.4879()			SUH38
A	4439-317-26-E	X2CrNiMoN17-13-5	1.4439	S31726			S31723
A	4445-317-00-U	X6CrNiMo19-13-4	1.4445()	S31700	317	SUS317	S31708
A	4434-317-53-I	X2CrNiMoN18-12-4	1.4434	S31753	"317LN"	SUS317LN	S31753
A	4941-321-09-I	X6CrNiTiB18-10	1.4941	S32109			S32169
A	4940-321-09-I	X7CrNiTi18-10	1.4940,1.4541	S32109	"321H"	SUS321H	S32169
A	4541-321-00-I	X6CrNiTi18-10	1.4541	S32100	321	SUS321	S32168
A	4652-326-54-I	X1CrNiMoCuN24-22-8	1.4652	S32654			S32652
A	4565-345-65-I	X2CrNiMnMoN25-18-6-5	1.4565	S34565			S34553
A	4961-347-77-E	X8CrNiNb16-13	1.4961
A	4912-347-09-I	X7CrNiNb18-10	1.4912	S34709	"347H"	SUS347H
A	4550-347-00-I	X6CrNiNb18-10	1.455	S34700	347	SUS347	S34778
A	4854-353-15-E	X6NiCrSiNCe35-25	1.4854	S35315
A	4389-384-00-I	X3NiCr18-16	1.4389()	S38400	384	SUS384	S38408
A PH	4980-662-86-X	X6NiCrTiMoVB25-15-2	1.4980,1.4606	S66286()	"660"	SUH660	S51525
A	4657-080-20-U	X4NiCrCuMo35-20-4-3	1.4657()	N08020
A	4563-080-28-I	X1NiCrMoCu31-27-4	1.4563	N08028
A	4864-083-77-X	X13NiCr35-16	1.4864	R20033,N08330		SUH330	S33010
A	4478-083-67-U	X2NiCrMoN25-21-7	1.4478()	N08367		SUS836L
A	4958-088-77-E	X5NiCrAlTi31-20	1.4958
A	4959-088-77-E	X8NiCrAlTi32-20	1.4959
A	4959-088-11-U	X8NiCrAlTi33-21	1.4959	N08811
A	4876-088-00-I	X8NiCrAlTi32-21	1.4876	N08800	"800"	NCF800
A	4959-088-10-U	X7NiCrAlTi33-21	1.4959	N08810	"800H"	NCF800H
A	4479-089-36-U	X1NiCrMoMnN34-27-6-5	1.4479()	N08936
A	4529-089-26-I	X1NiCrMoCuN25-20-7	1.4529	N08926	"926"
A	4539-089-04-I	X1NiCrMoCu25-20-5	1.4539	N08904	"904L"	SUS890L	S39042
A	4656-089-04-I	X1NiCrMoCu22-20-5-2	1.4656()
AF	4460-312-00-I	X3CrNiMoN27-5-2	1.446	S31200			S22553
AF	4481-312-60-J	X2CrNiMoN25-7-3	1.4481()	S31260		SUS329J4L	S22583
AF	4424-315-00-I	X2CrNiMoSiMnN19-5-3-2-2	1.4424	S31500
AF	4462-318-03-I	X2CrNiMoN22-5-3	1.4462	S32205,S3	F51,F60	SUS329J3L	S22053
AF	4162-321-01-E	X2CrMnNiN21-5-1 *)	1.4162	S32101
AF	4062-322-02-U	X2CrNiN22-2 *)	1.4062	S32202
AF	4362-323-04-I	X2CrNiN23-4	1.4362	S32304			S23043
AF	4507-325-50-X	X3CrNiMoCuN26-6-3-2	1.4507	S32550			S25554
AF	4507-325-20-I	X2CrNiMoCuN25-6-3	1.4507	S32520
AF	4501-327-60-I	X2CrNiMoCuWN25-7-4	1.4501	S32760			S27603
AF	4410-327-50-E	X2CrNiMoN25-7-4	1.441	S32750			S25073
AF	4658-327-07-U	X2CrNiMoCoN28-8-5-1 *)	1.4658()	S32707
AF	4477-329-06-E	X2CrNiMoN29-7-2 *)	1.4477	S32906
AF	4480-329-00-U	X6CrNiMo26-4-2	1.4480()	S32900	329	SUS329J1
AF	4485-332-07-U	X2CrNiMoN31-8-4	1.4485()	S33207

A:austenitic *) patented grade ” ” : ‘AISI like’ common name
F:ferritic M:martensitic () EN nb issued for ISO grade
AF: austenitic-ferritic PH:Precipitation Hardening

(1)The ISO name is composed of 4 parts structure XXXX-YYY-ZZ-T
XXXX is a remindr of the European coding, YYY a reminder of the old AISI codes, ZZ an ISO coding and T an additional information
T is a letter from :
-C Chinese based composition -I genuine ISO composition -U USA based composition
-E European based composition -J Japanese based composition -X comp. origin. from more 2 stds