fbpx

Dismantling joint

Dismantling joint provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps.

Please send your inquiry by   sales@sunnysteel.com

Description

dismantling joint constructionDismantling joint provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps.

More specifically, Dismantling Joints comprise a tubular coupling member with a hub angularly integral with the drive shaft; and a ring positioned radially outwards of the hub and angularly integral with the driven shaft.

More specifically, the joints may comprise a single coupling member, with the hub and ring connected directly to the drive shaft and driven shaft.

Alternatively, the joints may comprise a number of coupling members angularly integral with one another; in which case, the hub of one of the coupling members is connected to the drive shaft, and the hub of another of the coupling members is connected to the driven shaft.

Specification

No.NameQuantityMaterial
1Body1QT450-10, Q235A
2Gasket1NBR
3Follover1QT450-10, Q235A
4Limited short pipe1Q235A
5bolt5Q235A, 35# 
6nut5nQ235A, 2# 
dismantling joint 01
dismantling joint 02
dismantling joint 03

Main data of dismantling joint

Nominal Diameter DNExternal diameter of pipe DwLengthFlange connecting dimension
0.6Mpa1.0Mpa
LL1DD1n-ThbDD1n-Thb
6576200401601304-M12161851454-M1620
80891901504-M16182001608-M1622
10011421017022018024
1251402402008-M162025021026
1501682652252852408-M20
2002193202802234029528
25027337533512-M162439535012-M20
3003252205044039512-M2024445400
3503774904452650546016-M2030
40042654049516-M202856551516-M2432
4504805955502861556520-M24
50053064560020-M203067062034
60063024075570520-M243078072520-M2736
70072086081024-M243289584024-M2740
8008203506097592024-M2734101595024-M3044
90092010751020361115105028-M3046
100010201175112028-M271230116028-M3350
120012203701405134032-M30401455138032-M3656
140014201630156036-M33441675159036-M3962
160016203801830176040-M33481915182040-M4568
180018202045197044-M36502115202044-M4570
200020204002265218048-M39542325223048-M4574
220022202475239052-M39602550244052-M5280
240024202685260056-M39622760265056-M5282
26002620450802905281060-M45642960285060-M5288
280028203115302064-M45683180307064-M5294
300030203315322068-M45703405329068-M56100
320032203525343072-M4576

Reliable

Compensator reliability is by the design, manufacture, installation and operation and management and other aspects of the composition. Reliability should also be considered from these aspects.

Material Selection For the selection of corrugated pipe for heating pipe network, in addition to considering the working medium, working temperature and the external environment, the possibility of stress corrosion should also be considered, the impact of water treatment agent and pipe cleaning agent on the material, etc.,

Based on this, the corrugated pipe material is welded and formed, and the cost performance of the material is optimized. The economical and practical corrugated pipe material is selected.

Under normal circumstances, the use of corrugated pipe material should meet the following conditions:

  1. high elastic limit, tensile strength and fatigue strength, to ensure the normal work bellows.
  2. good plasticity, easy corrugated pipe processing and shaping, and can be followed by the treatment process (cold hardening, heat treatment, etc.) to get enough hardness and strength.
  3. better corrosion resistance, to meet the bellows in different environments work requirements.
  4. good welding performance, to meet the bellows in the production process of the welding process requirements.

For the laying of the heat pipe network, when the compensator is located in the lower pipelines, rain or accidental sewage will soak corrugated pipe, should consider the use of more corrosion-resistant materials, such as iron-nickel alloy, high-nickel alloy. Due to the high price of such materials, it may be advisable to add a corrosion-resistant alloy only to the surface in contact with the corrosive medium when making the bellows.

What different varieties of expansion joints are there?

In a piping system a Expansion joints alternately known as Bellows are like sealed springs. Sealed because it is required to contain the fluid pressure which is flowing through it and spring because it is required to respond to the movement of the connected piping without offering appreciable stiffness to the piping system.

An expansion joint/bellow element employed in a piping system is an assembly of generally more than one convolute in series. The convolutes are designed strong enough to withstand the internal pressure of the system, at the same time the typical contour of the convolute assembly allow sit to flex under thermal movement of the connected piping. As a result of this extreme flexibility the expansion joint / bellow as such is highly incapable of absorbing any longitudinal loads by its own,thereby requiring external attachments to transfer these longitudinal loads to its connected piping for maintaining the overall stability of the piping system under question.

Common types of expansion joints

  • Simple Expansion Joint
  • Universal Expansion Joint
  • Pressure Balanced Expansion Joint
  • Hinged Expansion Joint
  • Gimbal Expansion Joint

However should site conditions demand a unique solution then end connections can be adapted to most applications.

What is the difference between a bellows and an expansion joint?

The terms can be confusing since there is no universally accepted meaning. We usually use the following definitions, but the terms “bellows” and “expansion joint” are generally considered interchangeable:

  • Expansion joint: An expansion joint is a complete unit with metal, rubber or fabric bellows and end connections and accessories, as well as optionally, internal linings, outer covers, etc … Other terms used: compensator, flexible.
  • Metal bellows: it is the flexible element of metal expansion joint.
  • Rubber bellows: it is the flexible element of rubber expansion joint.
  • Internal lining: the internal lining goes inside the expansion compensator, underneath the metal bellows or the rubber bellows to prevent the circulating fluid from falling directly on the bellows. This reduces flow disturbance and allows the bellows temperature to be controlled in the design.

Types

Pipe expansion joints are also known as compensators, as they ‘compensate’ for the thermal movement.

Piping expansion joint construction
Piping expansion joint construction

Pipe expansion joints are necessary in systems that convey high temperature commodities such as steam or exhaust gases, or to absorb movement and vibration. A typical type of expansion joint for pipe systems is a bellows which can be manufactured from metal (most commonly stainless steel), plastic (such as PTFE), or an elastomer such as rubber.

A bellows is made up of a series of one or more convolutions, with the shape of the convolution designed to withstand the internal pressures of the pipe, but flexible enough to accept the axial, lateral, and/or angular deflections. Expansion joints are also designed for other criteria, such as noise absorption, anti-vibration, earthquake movement, and building settlement.

Tube – A protective, leak proof lining made of synthetic or natural rubber. The tubes primary function is to eliminate the possibility of materials being handled penetrating the carcass.

Carcass – The carcass or body of the expansion joint consists of fabric, and when necessary metal.

Cover – The exterior surface of the joint.

Fabric Reinforcement – The carcass fabric reinforcement is the flexibility and supporting member between the tube and cover.

Metal Reinforcement – Wire or solid steel rings imbedded in the carcass, often used for strengthening.

Retaining Ring – Used to compress the expansion joint flange to the mating flange to create a seal. Also called clamp bars or backing bars. Applies to most all expansion joints.

Mating Flange – Used to connect the pipe joint to the pipe in which it is being installed.

Control Rod – Used to limit the axial movements during operation, and prevent the joint from exceeding its movement capabilities. The rods attach the mating flange and expansion joint. Typically used on piping joints, but can be installed on most any joint when required.

Expansion joints are an assembly designed to safely absorb sound, expansion, con traction and vibration to ensure expansion jointsthat the application stays in fully working order.

When we apply this technique to pipe systems, we brand the term ‘pipe expansion joint’ or ‘bellows’.

These pieces of equipment are used in pipe work where movement, thermal expansion and much more could cause problems. The pipe expansion joints are made up from one or more convolutions, which are designed to move or expand to relieve the stress from the solid pipe. The amount of movement or expansion within the application will determine the number and shape of convolutions required. Expansion joints can be manufactured from a range of different materials, from stainless steel and PTFE, to rubber.

Pipe expansion joints are also designed for other criteria, such as noise absorption, anti vibration, earthquake movement and building settlement. Metal expansion joints have to be designed according to rules. Pipe expansion joints are used in a number of industries, including; oil, petrochemical and paper industries.

Pipe expansion joints are often manufactured to withstand temperatures from minus 300°F, up to 4000°F, as well as being able to resist at full vacuum or 2000 psig. Expansion joints can be manufactured from a range of different materials aforementioned. Before the introduction of pipe expansion joints, engineers were battling with the task of combating problems regarding thermal expansion, corrosion and abrasive factors that took effect on the functionality of various applications. Fabric joints can be used in a number of applications for turbines and pipelines, which can defend against resistance, heat and a range of other environmental factors.

Pipe expansion joints are crucial components in the pipe technology sector, which serve a huge number of industries. They are used to counterbalance length changes that generally occur in pipelines from temperature changes and can also absorb vibrations. It is a cost effective solution to increase the life span, reliability and costs of many applications through equipment and process management.


Types of metal expansion joints

Single unrestrained

Single unrestrained

This expansion joint is the simplest one available and comes with one bellows section and end connections. This type of expansion joint requires the most control of the adjacent piping in regards to anchors and guiding.

Universal expansion joint

Universal expansion joint

This expansion joint has two bellows sections connected by a center pipe section. This design allows for large amounts of lateral deflection. The universal can also allow for axial and angular movements in addition to the lateral movement. This expansion joint does not come with the hardware to resist pressure thrust. Like the single unrestrained expansion joint the universal expansion joint must be properly anchored and supported.

Hinged expansion joint

Hinged expansion joint

This expansion joint has a single bellows section and is designed to allow angular rotation in one plane only. The hinge hardware is rigid in the axial direction so as not to allow the expansion joint to allow axial movement in piping systems. The hinged expansion joint is usually used in pairs of threes or in combination with a gimbal expansion joint.

In-line pressure balanced expansion joint

In-line pressure balanced expansion joint

This expansion joint is unusual in its’ design in that it absorbs lateral, axial, and angular movement. This in-line pressure balanced expansion joint is designed for cases where the main anchoring is not feasible or pressure loads are to high for equipment like pumps and turbines.

Pressure balanced elbow expansion joint

Pressure balanced elbow expansion joint

This expansion joint is designed to not only restrain the pressure thrust but in addition, balances the pressure thrust so as not to have anchoring of the adjacent piping or equipment. This pressure balanced elbow expansion joint can be designed as single or universal depending on how much lateral movement is required.

Universal expansion joint

Universal expansion joint

This expansion joint has a single bellows section. The gimbal expansion joint is designed to allow angular rotation in any plane by using two pairs of hinges connected to a common central floating ring. The gimbal expansion joint is usually used in pairs of threes or in combination with the hinged expansion joint.

Single tied expansion joint

Single tied expansion joint

This expansion joint is exactly like the single unrestrained expansion joint but it is provided with tie rods. When adding tie rods to the expansion joint it stops the bellows from overextending. The tie rods act as limit rods and has stops set to allow axial movement to a specifically designed movement.

Tied universal expansion joint

Tied universal expansion joint

This expansion joint is exactly like the universal expansion joint but the tie rods have been designed into the unit. By adding the tie rods you restrain pressure thrust. The pressure balance expansion joint will not accept external axial movement without overcoming this pressure thrust force.

Accessories


Accessories are added to an expansion joint installation to meet specific customer, application or code requirements. Some are used to control movement, others to protect the bellows in the event of pressure thrust, and still others to defend against corrosion caused by media inside or from the environment outside the bellows.

  1. Bellows
  2. Angle Flange
  3. Weld End
  4. Liner (Baffle)
  5. Cover
  6. Particulate Barrier/Insulation
  7. Liner Seal
  8. Purge

Internal sleeves

  1. Minimize the pressure drop through expansion joint.
  2. Prevent vibration of bellows induced by high velocity, turbulent flow.
  3. Prevent erosion of bellows in abrasive services.
  4. Internally insulate bellows in high temperature services.

Anchor base

Divide piping into two separate segments insuring proper movement of each bellows in double type expansion joint.

External cover

  1. Protect bellows against mechanical damage during installation and in service.
  2. Protect personnel in hazardous services.
  3. Serve as support for external insulation.

Purge aeration connections
Used in conjunction with internal sleeve to:

  1. Prevent packing, “coking”, of flue-solids between internal sleeve and bellows.
  2. Introduce coolant between bellows and internal sleeve in very high temperature service.

Tie rods

  1. Prevent application of pressure thrust to piping, or equipment when expansion joint is used for lateral deflection and/or angular rotation only.
  2. Used as limit rods on expansion joints for axial movement. Limit over-extension of joint and damage to piping or equipment if anchor fails.
  3. Used as control rods to limit and control movement of universal type expansion joints.

Oversized bellows

  1. Permit use of internal sleeve for joint moving laterally or angularly without reducing inside diameter.
  2. Used in conjunction with internal sleeve to reduce bellows temperature in very high temperature service.

Liners

Internal liners can be used to either protect the metallic bellows from erosion or reduce turbulence across the bellows. They must be used when purge connectors are included in the design. In order to provide enough clearance in the liner design, appropriate lateral and angular movements must be specified by the designer. When designing an expansion joint with combination ends, flow direction must be specified as well.

Covers

External covers should be used to protect the internal bellows from being damaged. They also serve a purpose as insulation of the bellows. Covers can either be designed as removable or permanent accessories.

Particulate barriers/purge connectors

In systems that have a media with significant particulate content (i.e. flash or catalyst), a barrier of ceramic fiber can be utilized to prevent corrosion and restricted bellows flexibility resulting from the accumulation of the particulate. Purge connectors may also be utilized to perform this same function. Internal liners must also be included in the design if the expansion joint includes purge connectors or particulate barriers.

Limit rods

Limit rods may be used in an expansion joint design to limit the axial compression or expansion. They allow the expansion joint to move over a range according to where the nut stops are placed along the rods. Limit rods are used to prevent bellows over-extension while restraining the full pressure thrust of the system.

Applications

Pipe expansion joints are necessary in systems that convey high temperature commodities such as steam or exhaust gases, or to absorb movement and vibration. An expansion joint is a useful component in an infinite number of applications.

A bellows is made up of a series of one or more convolutions, with the shape of the convolution designed to withstand the internal pressures of the pipe, but flexible enough to accept the axial, lateral, and/or angular deflections.

Expansion joints are also designed for other criteria, such as noise absorption, anti-vibration, earthquake movement, and building settlement.

Engineers and pipe designers routinely incorporate expansion joints into their pipe systems, as expansion joints add flexibility in to the design and reduce costs through removing the complexity of fix points, guides and reduces the overall space requirements for the pipe system.

Further, expansion joints are more effective than alternatives such as pipe bends and pipe loops due to their greater ability to conserve space, their economic efficiency and better performance in absorbing larger movements.
Where are expansion joints in use?

Where are expansion joints in use?

An expansion joint is a useful component in an infinite number of applications. Metal expansion joint assemblies are commonly used for all kinds of industries and applications including:

  • Power Generation
  • Co-Generation, Petrochemical
  • Chemical Processing
  • Pulp Paper Manufacturing
  • Cryogenic Process
  • Pressure Vessel and heat Exchanger
  • Heat Steam recovery Generator
  • Architect Engineering
  • Construction Engineering
  • Mechanical contractor
  • Pharmaceutical manufacturing
  • Gas Turbine, Gas Transmission
  • Diesel Engine Mfg, Incineration
  • Waste Water Treatment

Expansion joints are often installed near boilers, heat exchangers, pumps, turbines, condensers, engines and in long pipe systems or pipe ducts.

Expansion joints come in a wide variety of designs. Some of them are standard and some are customised as per client requirements.

Although their design may vary significantly, all expansion joints are nevertheless composed from some of the following components, all with one or more specific functionalities: bellows, welding ends, flanges, hinges, tie-rods, spherical washers, wire mesh, insulation, inner sleeve, external cover, elbow and/or ring reinforcement/equalizing rings.

In general, there are fabric, metallic, and rubber expansion joints.

  • Metallic Expansion Joints
    • Single Expansion Joints
    • Hinged Expansion Joints
    • Gimbal Expansion Joints
    • Universal Expansion Joints
    • Elbow Pressure Balanced Expansion Joints
    • In-line Pressure Balanced Expansion Joints
    • Externally Pressurized Expansion Joints
    • Toroidal Expansion Joints
    • Thick Wall Expansion Joints
    • Slip-type Expansion Joints
    • Rectangular Metallic Expansion Joints
    • Refractory Lined Expansion Joints
  • Fabric Expansion Joints
  • Rubber (Neoprene) Expansion Joints

In a piping system a Expansion joints alternately known as Bellows are like sealed springs. Sealed because it is required to contain the fluid pressure which is flowing through it and spring because it is required to respond to the movement of the connected piping without offering appreciable stiffness to the piping system.

Application of expansion bellows:

The Bellows are generally employed in a piping system in one of the following situations:

  • When the space constraints do not permit providing adequate flexibility by conventionalmethods (e. g. expansion loops etc.) for maintaining the system stresses withinacceptable limits.
  • When conventional solutions (e.g. expansion loops etc.) create unacceptable processconditions (e.g. excessive pressure drop).
    When it is not practical to limit the piping induced loads on the terminal nozzles of theconnected equipment within admissible limits by conventional methods.
  • When the equipment such as Compressors, Turbines, Pumps etc. necessitate isolatingthe mechanical vibrations from being transmitted to the connected piping.

How do they work?

An expansion joint or movement joint is an assembly designed to safely absorb the heat-induced expansion and contraction of construction materials, to absorb vibration, to hold parts together, or to allow movement due to ground settlement or earthquakes.

They are commonly found between sections of buildings, bridges, sidewalks, railway tracks, piping systems, ships, and other structures.

Expansion joints – sometimes called expansion bellows, flexible joints or Expansion joint – are devices that comprise of a flexible element known as the bellows membrane that is fitted to end connections that are best suited to the pipework they are to be installed in.

Most bellows membranes are manufactured from stainless steel and are made up of a series of convolutions manufactured to withstand the pressure of the system but also must be suitable to accept the movements for which they are designed. The bellows membrane comprises of a series of convolutions designed to withstand the internal pressures of the system, but at the same time flexible enough to accept axial, lateral and angular deflections.

The joint needs to be a highly resistant nature so it’s necessary to make sure that it’s far thicker than you’d expect. In turn, this slows down any effects of potential corrosion as although it may be affected by the elements over time, it will still retain its density.

Ducted Air Systems

Expansion joints are required in large ducted air systems to allow fixed pieces of piping to be largely free of stress as thermal expansion occurs.

Bends in elbows also can accommodate this.

Expansion joints also isolate pieces of equipment such as fans from the rigid ductwork thereby reducing vibration to the ductwork as well as allowing the fan to “grow” as it comes up to the operating air system temperature without putting stress on the fan or the fixed portions of ductwork.

An expansion joint is designed to allow deflection in the axial(compression) or laterally (shear) or angular (bending) deflections. Expansion joints can be non-metallic or metallic (often called bellows type). Non-metallic can be a single ply of rubberized material or a composite made of multiple layers of heat and erosion resistant flexible material.

Typical layers are: outer cover to act a gas seal, a corrosion resistant material such as Teflon, a layer of fiberglass to act as an insulator and to add durability, several layers of insulation to ensure that the heat transfer from the flue gas is reduced to the required temperature and an inside layer.

A bellows is made up of a series of one or more convolutions of metal to allow the axial, lateral or angular deflection required.

What industries use expansion joints?

Expansion joints are used in all kinds of different sectors and in a huge range of different industrial contexts.

  • Expansion joints are particularly suited for aggressive chemicals and for abrasion resistance.
  • Sunny Steel Metal Expansion Joints can be custom-made from a range of carbon steels, austenitic stainless steels anc ceramic lined.
  • Stainless steel pipe expansion joint, with control rods

Specific industries that use expansion joints include the Energy sector such as nuclear power plants and district heating schemes.

Essentially, wherever there is a need to control pipework movement expansion joints are required. They are used in factories and power plants wherever thermal expansion needs to be controlled, such as pipelines that connect with condensers or power turbines. They are used in oil and fuel gas applications.

The Petrochemical industry on oil refineries, pumping stations and oil rigs.

Civil engineering, waste management, sewage treatment, recycling, water treatment, aerospace, aviation, defence, the automotive industry, agriculture, mining, metals manufacturing, food and dairy manufacturing and packaging, and so on.

Expansion joint application

Delivery

Inner package of bellow expansion joint
plastic bag + carton cases one pcs/box
Outer package of bellow expansion joint
Wooden cases
Inner plastic film packing, outer standard export wooden case packing.

Courier company transport, air freight and sea transport. It depends on your actual order details and quantity.

Ceramic lined pipe expansion joints

Size measurement of expansion joints

Size measurement of expansion joints

Packing ceramic lined pipe expansion joints

Packing ceramic lined pipe expansion joints

Inquiry

Need to inquire about our products? Fill out the form below and our staff will be in touch!

Contact Form Demo

FAQ

Q: How long is your delivery time?
A: The delivery time of customized products is generally 25 35 days, and non customized products are generally shipped within 24 hours after payment.

Q: Do you provide samples? Is it free?
A: If the value of the sample is low, we will provide it for free, but the freight needs to be paid by the customer. But for some high value samples, we need to charge a fee.

Q: What are your payment terms?
A: T/T 30% as the deposit,The balance payment is paid in full before shipment

Q: What is the packaging and transportation form?
A: Non steaming wooden box and iron frame packaging. Special packaging is available according to customer needs. The transportation is mainly by sea.

Q: What is your minimum order quantity?
A: There is no minimum order quantity requirement. Customized products are tailor made according to the drawings provided by the customer.