fbpx

Hot Selling Trending Products Custom Wear Resistant Non Standard Customized Product

Our main products are cast basalt products; Ceramic wear-resisting composite products (alumina ceramic composite products, silicon carbide ceramic composite products); Wear-resistant valves; Wear-resistant castables and wear-resistant cement; calendering microcry-stalline cast basalt tile, impact resistant wear resistant colloidal cast basalt tile and so on.

Please send your inquiry by   sales@sunnysteel.com

Description

We provide customized services for various products

Our main products are cast basalt products; Ceramic wear-resisting composite products (alumina ceramic composite products, silicon carbide ceramic composite products); Wear-resistant valves; Wear-resistant castables and wear-resistant cement; calendering microcry-stalline cast basalt tile, impact resistant wear resistant colloidal cast basalt tile and so on.

Here are the spare parts needed for the plumbing installation:

KRH Series Clamp-on Flexible Ring Pipe Joint
GB8260 DN50-3200mm PN1.6-32MPa It is widely used in pipeline connections for conveying various media. It is a new type of flexible pipe joint that replaces flange and compensator.

KRJ Series Clamp-on Flexible Shoulder Pipe Joint
GB8261 DN50-1600mm PN1.6-10.0MPa It is widely used in pipeline connections for conveying various media. It is a new type of flexible pipe joint that replaces flange and compensator.

Cast basalt half pipes have an excellent performance of high abrasive and high corrosion resistance. Cast basalt is a mineral material produced by melting natural basalt at a temperature of approximately 1300°C, followed by casting into moulds. This contributes to its superb physical and chemical properties.

Cast basalt half pipe is a common component of the heating part of tubes. It is usually used in power station boilers.The useful life of tube shield is 3-5years. The tube shield has a variety of material and the selection of the material shall be subject to the original design of the boiler.The tube shield is divided into straight pipe and bend pipe. The main effect of tube shield is to protect the pipe and increase the service life of the pipe.

Cast basalt pipe shields are designed to eliminate major maintenance and downtime costs from boiler and condenser tube failure.

We offer cast basalt tiles for coal bunkers and chutes. These cast basalt tiles are bedded as well as jointed in cement/special bonding agents like resins depending upon application. These tiles mostly find application in automotive industry and are designed to provide long-lasting lining and enhancement to involved operational life cycle for both plant as well as equipment.

Data of cast basalt tiles

Chemical component

SiO2Al2O3Fe2O3TiO2CaOMgOK2ONa2OFeOP2O5MnO
42-45%13-16%13-14%0.02210-12%10-11%0.0450.04513-14%<1%<1%

Physical property

NO.ITEMPERFORMANCE VALVE
1Specific gravity2.9-3.05gm/cc
2Compressive strength3000-4500kg per sq cm(min)
3Bending strength300kg per sq cm(min)
4Water Absorption0
5Solubility in Acids0.006
6Hardness8(MIN.)Moh Scale
7Modules of elasticity11.1×104N/mm2
8Expansion coefficient (room temperature to 60°C)0.75×10-5/K
9Thermal Conductivity1.15W/mk
10Special Heat Capacity0.8kj/Kg.K
11Highest Temperature For application350°C

Advantages:
* Utilizing Cast Basalt enhances and improves operational life of plants.
* These are best suited for jobs where extensive cutting is needed.
* We can also deliver pre-cut tailored tiles based on the considerations of vibration, impact and other factors at client’s end.

Standard specification

Thickness
(mm)
Length * Width
(mm)
16-20< 200
20-30< 300
30-50< 400

Combined with the cast basalt production technology. We can manufacture cast basalt tiles according to various sizes and shapes.

Ultra-thin cast slate: the thinnest 12mm

The self-developed ultra-thin Cast basalt tile is a new product of the international advanced level.

Application

Cast basalt pipe shield is mainly used in thermal power plants, steel mills, mines and other parts with heavy wear, such as raw coal bunkers, mine bins, coal unloading trenches, hoppers, ore troughs, flotation machines, chutes and other parts.

  • Round coal bunker lining: ultra-thin cast slate 14-20mm thick;
  • Coal discharge ditch lining: commonly used 25-30mm thick cast slate;

 

Coal drop bucket lining

lined with cast slate, generally 25-30mm (high chromium steel is best used for coal drop points);

 

 

Application

Cast basalt pipeline transportation on the apllied site
Cast basalt pipeline transportation to the applied site

Cast basalt pipes owing to an excellent performance of abrasive and corrosion resistance .It may be used as the liner of pipeline for hydraulic,pneumatic of conveyance of material and corrosion materials or slurry.We can offer the basalt pipes with nominal diameter of 40mm-800mm.

Cast Basalt can be used for the lining of pipework, chutes, bunkers, cyclones, and hoppers. It has become the global standard in areas such as ash slurry pipework, often used at fossil-fuel power stations. It is an all-round cost-effective and adaptable lining material that extends the life of equipment in the pipe or tile form where affected by erosion.

Cast Basalt is well-proven in a variety of industries as a cost-effective, long-lasting lining material used to extend the operating life of equipment manufactured or lined with lower-wearing materials such as steel, cast iron, rubber, and polyurethane.

Cast basalt lined steel pipe, as both a wear—resistant and corrosion—resistant materials, the transport properties of wear or corrosion of materials, after thirty years of practical verification, cast basalt lined steel pipe can be well done.

Installation site

Cast basalt is also used in cement plants for making air separators, chain conveyor, silica hoppers, nozzles, coal hoppers, cement hoppers, cyclones, raw mill ducts, chutes, thick slurry lines, mixers, grate cooler housing, coal ventury etc.

Cast basalt pipeline installation site
Cast basalt pipeline installation site

Cast basalt pipes have an excellent performance of abrasive resistant and corrosion resistant, can be used as the pipeline lining in conveying wearable materials and corrosion materials. Such as: electric power plant, chemical plant, metallurgy industry, mine and so on.


  • Tailings pipeline
  • concentrate pipeline
  • pipeline of transporting ore
  • pipe of transporting ash and residue in electric power station
  • pipe for transporting coal—water
  • pipe of sending sand by wind power
  • The concentration of slurry chute
  • edge—milling machine
  • disk feeder
  • slurry chutes

  • blast flush fines chute
  • blast furnace slag ditch
  • raw ore chute
  • funnels of autogenously mill
  • classification return mines chute
  • overflow launder
  • coke—conveying chute
  • saturator
  • acid separator
  • cyclone separator

  • sand mixed machine
  • punch mine ditch in mining industry
  • storage tank mine blast, coke funnel
  • all kinds of chutes, funnels, storage bin andso on.
  • load and unload material chute in fire—resistant industry
  • centrifugal concentrator punch mine launder


Cast Basalt Composite Pipes Used for Years

  • hydro cyclone
  • Precipitator
  • pickling tank
  • slag conveyor
  • mixing machine downhill plate
  • conveying equipments need wear protection

Packing

Cast basalt pipe adopts foam packaging, then in accordance with the specifications to put them into wooden cases, sometimes they can be directly loaded into the compartment or container.

Connection

Cast basalt lined pipes and fittings can be supplied with different and connections as per the design requirement to suit the site conditions and easy installation.

Flange Connection

As a standard production, we supply flanged components according to DIN, with at least one movable flange for easy mounting, but pipes with plain ends or for custom coupling are also available. Flange Connection Is One Kind Of Common Pipeline Installation Connections. By Two Pieces Of Flanges, Pipeline, Valve, Equipments Are Connected And It Forms A Tight Piping System. When Pipeline Pressure Is Larger, Flange Connection Is Priority Selection. Flanges Have Lots Of Different Sizes. Flange Size Is Determined According To Pipeline Normal Diameter And Pipeline Operation Pressure.

The parameters of the outside steel pipe will be decided according to the working pressure of the system. The connection of the pipes and fitting will be of flange connections, easy—flexible joint connection or by welding.

By two pieces of flanges, pipeline, valve, equipments are connected and it forms a tight piping system. When pipeline pressure is larger, flange connection is priority section. Flanges have lots of different sizes.

Flange size is determined according to pipeline normal diameter and pipeline operation pressure.


Welding & Beveled End

It suits short Distance Pipeline System Without Maintenance. It Is One Kind Of Common Installation Connections. It Requires Installation Personnel Higher Welding Ability. It Also Restricts By Welding Site, Distance, Welding Positions. Welding Connections Is Inconvenient In Later Maintenance.


Easy-Flexible Joint Connection

It Is One Of High Efficient And Rapid Installation Connection. I T Has The Below Characteristic: Easily Install And Disassemble, Fast Installation, Temperature Adjustable Compensation Function, Saving The Necessary Expansion In Long Pipeline. Easy-Flexible Joint Also Has Angle Compensation Characteristic. At Smaller Angle Turning Points, Easy-Flexible Joint Can Be Instead Of Bends And Adjust Angle.


Design aspects

1. The bend radius should be minimum 3 times of the nominal bore.

2. At discharge end of each bend, cast basalt lined straight pipe of length 5 to 12 times the nominal bore must be used.

Inquiry

Need to inquire about our products? Fill out the form below and our staff will be in touch!

Contact Form Demo

FAQ

Q: How long is your delivery time?
A: The delivery time of customized products is generally 25 35 days, and non customized products are generally shipped within 24 hours after payment.

Q: Do you provide samples? Is it free?
A: If the value of the sample is low, we will provide it for free, but the freight needs to be paid by the customer. But for some high value samples, we need to charge a fee.

Q: What are your payment terms?
A: T/T 30% as the deposit,The balance payment is paid in full before shipment

Q: What is the packaging and transportation form?
A: Non steaming wooden box and iron frame packaging. Special packaging is available according to customer needs. The transportation is mainly by sea.

Q: What is your minimum order quantity?
A: There is no minimum order quantity requirement. Customized products are tailor made according to the drawings provided by the customer.