Our team is highly trained and experienced in servicing and producing all types of steel supplies. Need help or have a question?
sales@abrasionresistantpipe.com
Tel.: +8621-3378-0199
A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders, masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.
These steel standards are helpful in guiding metallurgical laboratories and refineries, product manufacturers, and other end-users of steel and its variants in their proper processing and application procedures to ensure quality towards safe use.
| Abbr. | Corresponding | Application |
|---|---|---|
| A53 | ASTM A53/A53m-99b | specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless |
| A74 | ASTM A74-98 | specification for cast iron soil pipe and fittings |
| A106 | ASTM A106-99e1 | specification for seamless carbon steel pipe for high-temperature service |
| A126 | ASTM A126-95e1 | specification for grey iron castings for valves, flanges, and pipe fittings |
| A134 | ASTM A134-96 | specification for pipe, steel, electric-fusion (arc)-welded (sizes nps 16 and over |
| A135 | ASTM A135-97c | specification for electric-resistance-welded steel pipe |
| A139 | ASTM A139-96e1 | specification for electric-fusion (arc)-welded steel pipe (nps 4 and over) |
| A182 | ASTM A182/A182m-99 | specificationfor forged or rolled alloy-steel pipe flanges, forged fittings, and valves and parts for high-temperature service |
| A252 | ASTM A252-98 | specification for welded and seamless steel pipe piles |
| A312 | ASTM A312/a312m-00 | specification for seamless and welded austenitic stainless steel pipes |
| A333 | ASTM A333/A333m-99 | specification for seamless and welded steel pipe for low-temperature service |
| A335 | ASTM A335/A335m-99 | specification for seamless ferritic alloy-steel pipe for high-temperature service |
| A338 | ASTM A338-84(1998) | specificationfor malleable iron flanges, pipe fittings, and valve parts for railroad, marine, and other heavy duty service at temperatures up to 650°f (345°c) |
| A358 | ASTM A358/A358m-98 | specification for electric-fusion-welded austenitic chromium-nickel alloy steel pipe for high-temperature service |
| A369 | ASTM A369/A369m-92 | specification for carbon and ferritic alloy steel forged and bored pipe for high-temperature service |
| A376 | A376/A376m-98 | specification for seamless austenitic steel pipe for high-temperature central-station service |
| A377 | ASTM A377-99 | index of specifications for ductile-iron pressure pipe |
| A409 | ASTM A409/A409m-95ae1 | specification for welded large diameter austenitic steel pipe for corrosive or high-temperature service |
| A426 | ASTM A426-92(1997) | specification for centrifugally cast ferritic alloy steel pipe for high-temperature service |
| A451 | ASTM A451-93(1997) | specification for centrifugally cast austenitic steel pipe for high-temperature service |
| A523 | ASTM A523-96 | specification for plain end seamless and electric-resistance-welded steel pipe for high-pressure pipe-type cable circuits |
| A524 | ASTM A524-96 | specification for seamless carbon steel pipe for atmospheric and lower temperatures |
| A530 | ASTM A530/A530m-99 | specification for general requirements for specialized carbon and alloy steel pipe |
| A648 | ASTM A648-95e1 | specification for steel wire, hard drawn for prestressing concrete pipe |
| A674 | ASTM A674-95 | practice for polyethylene encasement for ductile iron pipe for water or other liquids |
| A691 | ASTM A691-98 | specification for carbon and alloy steel pipe, electric-fusion-welded for high-pressure service at high temperatures |
| A694 | ASTM A694/A694m-00 | specification for carbon and alloy steel forgings for pipe flanges, fittings, valves, and parts for high-pressure transmission service |
| A716 | ASTM A716-99 | specification for ductile iron culvert pipe |
| A733 | ASTM A733-99 | specification for welded and seamless carbon steel and austenitic stainless steel pipe nipples |
| A742 | ASTM A742/A742m-98 | specification for steel sheet, metallic coated and polymer precoated for corrugated steel pipe |
| A746 | ASTM A746-99 | specification for ductile iron gravity sewer pipe |
| A760 | ASTM A760/A760m-99 | specification for corrugated steel pipe, metallic-coated for sewers and drains |
| a761 | ASTM A761/A761m-98 | specification for corrugated steel structural plate, zinc-coated, for field-bolted pipe, pipe-arches, and arches |
| A762 | ASTM A762/A762m-98 | specification for corrugated steel pipe, polymer precoated for sewers and drains |
| A790 | ASTM A790/A790m-99 | specification for seamless and welded ferritic/austenitic stainless steel pipe |
| A796 | ASTM A796/A796m-99 | practice for structural design of corrugated steel pipe, pipe-arches, and arches for storm and sanitary sewers and other buried applications |
| A798 | ASTM A798/A798m-97a | practice for installing factory-made corrugated steel pipe for sewers and other applications |
| A807 | ASTM A807/A807m-97 | practice for installing corrugated steel structural plate pipe for sewers and other applications |
| A810 | ASTM A810-94 | specification for zinc-coated (galvanized) steel pipe winding mesh |
| A813 | ASTM A813/A813m-95e2 | specification for single- or double-welded austenitic stainless steel pipe |
| A814 | ASTM A814/A814m-96 (1998) | specification for cold-worked welded austenitic stainless steel pipe |
| A849 | ASTM A849-99 | specification for post-applied coatings, pavings, and linings for corrugated steel sewer and drainage pipe |
| A861 | ASTM A861-94e1 | specification for high-silicon iron pipe and fittings |
| A862 | ASTM A862/A862m-98 | practice for application of asphalt coatings to corrugated steel sewer and drainage pipe |
| A865 | ASTM A865-97 | specification for threaded couplings, steel, black or zinc-coated (galvanized) welded or seamless, for use in steel pipe joints |
| A872 | ASTM A872-91 (1997) | specification for centrifugally cast ferritic/austenitic stainless steel pipe for corrosive environments |
| A885 | ASTM A885/A885m-96 | specification for steel sheet, zinc and aramid fiber composite coated for corrugated steel sewer, culvert, and underdrain pipe |
| A888 | ASTM A888-98e1 | specification for hubless cast iron soil pipe and fittings for sanitary and storm drain, waste, and vent piping applications |
| A926 | ASTM A926-97 | test method for comparing the abrasion resistance of coating materials for corrugated metal pipe |
| A928 | ASTM A928/A928m-98 | specification for ferritic/austenitic (duplex) stainless steel pipe electric fusion welded with addition of filler metal |
| A929 | ASTM A929/A929m-97 | specification for steel sheet, metallic-coated by the hot-dip process for corrugated steel pipe |
| A930 | ASTM A930-99 | practice for life-cycle cost analysis of corrugated metal pipe used for culverts, storm sewers, and other buried conduits |
| A943 | ASTM A943/A943m-95e1 | specification for spray-formed seamless austenitic stainless steel pipes |
| A949 | ASTM A949/A949m-95e1 | specification for spray-formed seamless ferritic/austenitic stainless steel pipe |
| A954 | ASTM A954-96 | specification for austenitic chromium-nickel-silicon alloy steel seamless and welded pipe |
| A972 | ASTM A972/A972m-99 | specification for fusion bonded epoxy-coated pipe piles |
| A978 | ASTM A978/A978m-97 | specification for composite ribbed steel pipe, precoated and polyethylene lined for gravity flow sanitary sewers, storm sewers, and other special applications |
| A984 | ASTM A984/A984m-00 | specification for steel line pipe, black, plain-end, electric-resistance-welded |
| A998 | ASTM A998/A998m-98 | practice for structural design of reinforcements for fittings in factory-made corrugated steel pipe for sewers and other applications |
| A999 | A999/A999m-98 | specification for general requirements for alloy and stainless steel pipe |
| A1005 | ASTM A1005/A1005m-00 | specification for steel line pipe, black, plain end, longitudinal and helical seam, double submerged-arc welded |
| A1006 | ASTM A1006/A1006m | specification for steel line pipe, black, plain end, laser beam welded |
ASTM standards for Heat-exchanger and condenser tubes
| Abbr. | Corresponding | Application |
|---|---|---|
| A179 | ASTM A179 / A179M | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
| A213 | ASTM A213/A213M | Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| A214 | ASTM A214 / A214M | Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
| A249 | ASTM A249 / A249M | Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A498 | ASTM A498 / A498M | Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins |
| A851 | ASTM A851 / ASME SA851 | Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes |
ASTM standards for Mechanical tubing
| Abbr. | Corresponding | Application |
|---|---|---|
| A511 | ASTM A511 / A511M | Specification for Seamless Stainless Steel Mechanical Tubing |
| A512 | ASTM A512 / ASME SA512 | Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
| A513 | ASTM A513 / A513M | Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
| A519 | ASTM A519 / A519M | Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| A554 | ASTM A554 | Specification for Welded Stainless Steel Mechanical Tubing |
ASTM standards for Structural tubing
| Abbr. | Corresponding | Application |
|---|---|---|
| A500 | ASTM A500 / A500M | Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| A501 | ASTM A501 / A501M | Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| A847 | ASTM A847 / A847M | Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| A618 | ASTM A618 / A618M | Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
